VALOR Clearview Fireplace
The Clearview, part of the portrait series from Valor is available as a direct vent zero clearance or an insert. Making it an easier gas fireplace to work with in almost all applications. If you’re worried about tight spaces, the Clearview is probably right for you.
If you currently have a B vent fireplace, ask us about the Valor B vent adaptor kit to see if it’s right for you.
| NG BTU Input | 6,500-20,500/hr |
|---|---|
| LPG BTU Input | 12,500-19,000/hr |
| ZC EnerGuide | NG 70.2%, LPG 70% |
| Insert EnerGuide | NG 64%, LPG 66% |
| ZC Framing Dimensions | 22 1/2″W x 32″H x 12 3/4″D |
| Insert Min. Cavity Dimensions | 20″ W x 25 1/4″H x 11 3/8″D |
Programmable remote ValorStat Plus system – cruise control for your fireplaces, Modulating fire turns down an incredible 70% for steady even heat, Heats without electricity – operates during an power outage, Heats without a need for a fan, Direct vent installs practically anywhere, Rear vent out most above grade, exterior walls with no visible vent pipe, Conventional vent to install on any approved existing chimney system, Co-linear vent to install into existing chimney systems, Ceramic glass window, Primary & secondary heat exchangers, Aluminized firebox & stainless steel burners for long life, ValorComfort – limited lifetime warranty program, Valor wall mount switch – turn your pilot light on & off with the touch of a switch, B vent adaptor kit
Please note: This unit can be converted into an outdoor fireplace (zero clearance version only), however, it requires a weatherproof enclosure with a minimum required overhang.
 |
 |
 |
 |
| Traditional Logs | Coals | Driftwood | Rocks |
 |
 |
 |
| Brick | Black Fluted | Reflective Black |
